February 19, 2016

Maifield take Q1 of eBuggy

thu_ryanM2

Ryan Maifield topped the opening round of eBuggy qualifying at the Dirt Nitro Challenge, the TLR driver heading the times from reigning champion Ty Tessmann.  Behind them 2WD Buggy World Champion Spencer Rivkin, who found himself in the C heat after a troubled practice yesterday, would complete the Top 3 followed by Ryan Lutz, Ryan Cavalieri and 2014 Champion David Ronnefalk.

thu_ebuggymaif

Runner-up last year to Tessmann having started the final from 10th on the grid, Maifield said ‘overall the car is good’ but added he made things a little more difficult for himself immediately after taking the start when he crashed on the step down.  Having to ‘buckle down’ after the error he said while he ‘had to push a little’ he was able to recover from the lost time and open with a TQ run.  While eBuggy is one DNC title he hasn’t held before, it is clear that the Arizona drivers main focus is on defending his Nitro Buggy title with him saying for Q2 he ‘might play around with tyres to learn for tomorrow’, tomorrow’s action being qualifying for nitro Buggy.

thu_nametessebugg

Finishing 3.483 seconds off Maifield’s pace, HB’s Tessmann said his D815 was ‘better than yesterday’ but added in terms of the set-up he was ‘still working on it’.  Suffering one spin out over the 7-minutes, the only driver who has been crowned champion in all three DNC classes said he is looking to ‘make (the buggy) more stable at high speed’.

thu_spencer

‘Better than expected’ was how Rivkin summed up his opening qualifier which was just 1/10th off Tessmann.  The Team Associated driver said ‘yesterday the car wasn’t my friend but we made a few changes this morning and it seems the right way to go’.  Seeded in the 3rd fastest heat due to his bad set-up yesterday, the 17-year-old said running in such a heat he didn’t know how well he was going but planning to leave the car unchanged he will ‘try to do the same again in the next one’.

View our complete image gallery here.

PostBDNC


February 18, 2016

Tessmann TQs opening Truggy qualifier at DNC

thu_tessmann

Ty Tessmann claimed the first TQ run of the 17th running of the Dirt Nitro Challenge, the multiple champion putting his HB top of the times in the first of the three rounds of Truggy Qualifying at the Fear Farm.  The four time champion, who held a three year reign over truggy at the Phoenix based event from 2012-2014, would finish 4-seconds clear of rivals.  In a close battle wth Ryan Maifield, a last lap error would drop the defending Buggy Champion back to third leaving Ryan Cavalieri to claim a P2.

thu_ty

Only 6th in yesterday’s single round of seeding practice having ‘drove seeding like a qualifier’, Tessmann said his opening qualifier ‘was good’.  Having made changes to his D8T from yesterday, the Canadian said it was better and for now he didn’t plan any further changes for Q2.  Describing this year’s Joey Christensen track layout as ‘super fast’, he added ‘some sections are so fast its hard to keep control of the truck’.  In terms of track conditions he said it was ‘a little rough but steady from yesterday’ and in terms of his tyre choose of Pro-line X3 Holeshots he was happy with them.

thu_cavalieri

Running Team Associated’s all new RC8T3, Cavalieri described his opening run as ‘not too bad’.  Having some issues with the watering of the track before the heat he said ‘once he got through the water session at the beginning’ it was pretty good.  Commenting on the new truck he said it is ‘really good’ and while ‘(he) didn’t feel he was going good it was still a top 3 run’ adding it shows the potential of what they have got.  Running with Maifield on the track he said this led to a few bobbles that cost him some time but he ‘regrouped and finished off (the heat) good’.  Running soft AKA Grid Iron tyres he will switch to super soft compound for Q2 saying this should make it more consistent.

thu_ryan

Posting the fastest lap, a 38.652, Maifield said ‘the truck is good and definitely the fastest’ but was slightly frustrated by a misunderstanding that lead him to a crash on the last lap.  With it announced that time had expired, the TLR driver came into the finish line section hard looking to get the best possible time leading to his truck crashing on the following drop down.  Unfortunately for the Arizona driver he was in fact still on the clock and needing to be marshalled he ended up with a 42-second final lap that dropped him to P3.  Maifield felt he also ‘lost a few tenths’ running with Cavalieri but looking to Q2 he feels with a clean run his truck, which was fitted with green compound JConcepts Reflex tyres, can TQ.

thu_tebo4

Last year’s Top Qualifier, Jared Tebo would post the fourth fastest time. The Kyosho driver & former champion said it was ‘a really clean run with just two bobbles’ but added he was ‘just not fast enough’.  ‘Need(ing) a little more speed’, he said he ‘need(s) to drop his fastest lap by half a second’ and the issue was ‘the same as always with truggy’ with him needing more steering and it ‘not fast enough in the 180 degree corners’.  Team-mate Cody King would take his Inferno ST-RR to the 6th fastest time saying it was ‘a clean run for the most part’.  Changing his truck set-up after yesterday’s seeding run, he wasn’t sure they went in the right direction and for Q2 he would probably change back.  Having run an old engine yesterday feeling it was lacking the power he wanted he fitted a brand new Reds Racing unit for Q1 which he said was better and to open with a Top 6 was a ‘good start to the weekend’.

thu_joe

Posting the 5th fastest time, Joe Bornhorst describing his run as ‘alright’ adding ‘after a rough start he would take a P5 for the first round’.  The rough start the Tekno driver was referring to was having to be marshalled on the 2nd lap as he struggled a little with the wet track.  He said ‘once the track dried and the top layer came off’it was a good clean run.  Running Pro-Line X3 Holeshots, he said he was thinking of gluing up a fresh set for Q2 but otherwise planned no changes to his car.  Team-mate Ryan Lutz, would take his Alpha Plus powered example of the NT48.3 to the seventh fastest time, described his opening performance as ‘slow’.  After issues in practice yesterday, which when asked about he referred to them as ‘undisclosable’, he said Q1 ‘was the first run (he) got to see what the truck was doing’.  Feeling he ran too hard a tyre compund he will change this for Q2 along with changing his ‘suspension a little bit’.

thu_warmupstees

Eighth quickest, HB’s Tanner Stees reported his truck suffering from ‘a little push’.  The 17-year-old said otherwise his opening qualifier ‘wasn’t bad’ but for Q2 he will run a short rear link to loosen up the rear off the truck.  For team-mate & reigning truggy champion David Ronnefalk, the opening round resulted in a P15 for the first European DNC winner.  Descibing his performance as ‘not good’, the Swede said his truck was ‘slow’.  Feeling he ran the wrong compound of AKA’s Grid Iron tyre he said a Super Soft would have worked better than a Soft and looking to get ‘more power’ he will also change to a different Orion engine.  Behind Stees, new Mugen signing Mike Truhe would posted the 9th fastest time with Dakotah Phend completing the Top 10.

DNC16TrugQ1Results

View our complete image gallery here.

PostBDNC


February 18, 2016

Chassis Focus – Ty Tessmann

Thurs-Tessmann-10

Chassis – HB D8T Tessmann edition
Engine – OS Spec 2
Tyres – Pro-Line Holeshot X2
Fuel – VP 30% Tessmann
Radio/Servos – Airtronics/Savox
Body – Pro-Line Enforcer

Remarks – Current 1/8th buggy World Champion Ty Tessmann is running his own edition D8T with his base setup with just a few minor changes. Due to the high speed nature of the track combined with the bumps they have decided to remove the rebound completely from the shocks which helps dumb the car down. Ty is also using his soon to be released 30% Tessmann edition fuel from VP Racing fuels. Having tested a lot throughout the past few months the final blend uses only synthetic oils which they say makes the power delivery crisper and the engine run longer.

Image Gallery

PostBDNC


February 18, 2016

Chassis Focus – Ryan Maifield

Thurs-MaifieldTrug-9

Chassis – TLR 8ight-T 4.0
Engine – Reds R5 Team
Tyres – JConcepts Reflex green
Fuel – Sidewinder
Radio/Servos – Airtronics/Spektrum
Body – JConcepts Finnisher

Remarks – Having been testing the all new 8ight-T 4.0 from TLR for a few months now, Ryan Maifield already has a base setup for the car in these conditions. The car, which is 11mm narrower than its predecessor, has only had some minor changes made to its setup with the Arizona native using softer springs front and rear. A result of the new driveline being straighter than the 3.0 he has had to go up in the centre diff oil from 10K to 15K to get more drive to the rear wheels.

Image Gallery

PostBDNC


February 18, 2016

Chassis Focus – Ryan Cavalieri

Thurs-CavRC8T-1

Chassis – Associated RC8T3
Engine – MX B2R
Tyres – AKA Grid Iron soft
Fuel – MX Racing Fuel
Radio/Servos – Airtronics
Body – Kit body

Remarks – Ryan Cavalieri is making his race debut with the newly released RC8T3 from Team Associated and took the top spot after seeding. Essentially the final kit car he has opted to used Factory Team rear aluminium hubs and because the car is underweight is using 100 grams of weight in the rear of the car. Arriving with a base setup on his car he has mostly made changes to the roll centres and damper oil changes to compensate for the higher temps in Arizona.

Image Gallery

PostBDNC


February 18, 2016

Chassis Focus – Ryan Lutz

Thurs-LutzTekno-1

Chassis – Tekno RC NT48.3
Engine – Alpha Plus Dragon 3
Tyres – AKA Grid Iron soft
Fuel – Byron Fuels
Radio/Servos – Futaba
Body – Kit body

Remarks – Running the kit standard truggy from Tekno Ryan Lutz started practice with the same setup he used at the US Open race at this same track back in November. Back then the track was smoother so he has made the diffs a little lighter to handle the bumps better and to compensate for the heat he has run slight stiffer oil. Other changes include using the 1 stop stiffer than kit springs all round and for aesthetics Ryan likes to use the version 2 rear wing mount which is slight taller than the latest version.

Image Gallery

PostBDNC